Royce Cross Group |
|
---|
Drilled, tapped and bored to receive standard taper bushings, the taper bore weld-on hubs boast an extended flange. This provides a convenient way to weld devices which must be fastened firmly to a shaft. The WH type weld-on-hub is designed for applicatiosn with a relatively low torque, requiring only moderate weld strngth. A heavy run of weld on the WH hub may cause some distortion of the taper bore.
Product Code: WH2517(WH25)
Category: Weld on hubs
Brand: FPT
2517 Weld on hub - WH25 (Std)Product Code: WH2517(WH25) Category: Power transmission - shaft fixings / Weld on hubs Brand: FPT Weight: 0.000000 Description:
WH2517 weld-on hubDrilled, tapped and bored to receive standard taper bushings, the taper bore weld-on hubs boast an extended flange. This provides a convenient way to weld devices which must be fastened firmly to a shaft. The WH type weld-on-hub is designed for applicatiosn with a relatively low torque, requiring only moderate weld strngth. A heavy run of weld on the WH hub may cause some distortion of the taper bore. FEATURES
|