Contactor 4kW 3 Phase 100.250v 10 AUX

AF09301013 Contactor 4kW 3 Phase 100.250v 10 AUX - AF Series Contactors

AF09 contactors are used for controlling power circuits up to 690 volts AC and 220 volts DC.

They are mainly used for controlling three-phase motors, non-inductive or slightly inductive loads.

AF contactors can manage large control voltage variations. One coil can be used for different control voltages used worldwide without any coil change.

They also have built-in surge protection and do not require additional surge suppressors. The AF... series 1-stack 3-pole contactors are of the block type design. - Main poles and auxiliary contact blocks: 3 main poles, 1 built-in auxiliary contact, front and side-mounted add-on auxiliary contact blocks (mechanically-linked auxiliary contacts compliant with Annex L of IEC 60947-5-1. N.C. mirror contacts compliant with Annex F of IEC 60947-4-1) - Control circuit: AC or DC operated - Accessories: a wide range of accessories is available.

Add-on auxiliary contact blocks and thermal overload relays available separately

SPECIFICATIONS

Series: AF09

Number of poles: 3

Coil voltage: 100 -250 V ac

Contact current rating: 7 amps

Contact voltage rating: 690 volts

Normal state configuration: NO (Auxiliary), 3NO (Main)

Number of auxiliary contacts: 1

Power rating: 5.5kW

Terminal type: Screw

Length: 74mm

Width: 44mm

Depth: 74mm

Maximum operating temperature: +55ºC, +70°C

Minimum operating temperature: -40°C, -25°C